Rotel RSP-1069 Bedienungsanleitung PDF herunterladen (Seite 33)

English

Digital Stereo discs

(PCM and HDCD)

This group of recordings includes any non-Dolby

Digital 2-channel signal from the RSP-1069’s

digital inputs. You can play these recordings

in 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo,

7-CH Stereo modes. You can also use Dolby

Pro Logic II matrix surround (5.1 ch systems),

Dolby Pro Logic IIx Music (6.1/7.1 ch sys

tems), Dolby Pro Logic IIx Cinema (6.1/7.1

ch systems), DTS Neo:6 surround, or one of

the DSP 1-4 modes.

All of the bass management settings (speaker

size, subwoofer, and crossover) are in effect

with digital stereo inputs.

NOTE: In addition to the options that follow,

you can select 2-channel, Pro Logic II Cin

ema (for 5.1 ch systems), Pro Logic II Music

(for 5.1 ch systems), Pro Logic IIx Music (for

6.1/7.1 ch systems), Pro Logic IIx Cinema (for

7.1 ch systems), 5-channel stereo, or 7-chan

nel stereo by pressing one of the surround

mode buttons on the remote (2CH, PLC, PLM,

5CH, 7CH).

• To select any mode for 2-channel

digital recordings. Press the SUR+ but

ton on the remote, then use the +/– but

tons to step through the optional modes

until the desired mode is displayed.

• To select STEREO mode for 2-chan

nel digital recordings. Press the 2CH

button on the front panel or remote.

• To select Dolby multichannel modes

for 2-channel digital recordings. You

can also step through the Dolby options

(Pro Logic II, Pro Logic IIx, or 3-Stereo)

by repeatedly pressing the DOLBY PLIIx

Mode button on the front panel. You can

select Pro Logic or Pro Logic IIx Cinema

or Music modes by pressing the PLC or

PLM buttons on the remote.

To change the Cinema or Music option

in Pro Logic II mode, press the SUR+ but

ton the remote twice while in Pro Logic

II or Pro Logic IIx modes. Then, press the

+/– buttons to select the option.

• To select DTS Neo:6 mode for 2-

channel digital recordings. You can

also step through the DTS options (Neo:6

Cinema or Neo:6 Music) by repeatedly

pressing the DTS Neo:6 button on the

front panel.

To change the Cinema or Music option

in Neo:6 mode, press the SUR+ button

the remote twice while in Neo:6 mode.

Then, press the +/– buttons to select the

option.

• To select DSP multichannel modes

for 2-channel digital recordings.

You can also step through the DSP op

tions (DSP 1-4, 5CH, 7CH) by repeatedly

pressing the DSP button on the front panel.

Directly select 5CH mode by pressing the

5CH button on the remote. Directly select

7CH mode by pressing the 7CH button

on the remote.

Analog Stereo

This type of recording includes any conven-

tional stereo signal from the RSP-1069’s ana

log inputs, including analog audio from CD

players, FM tuners, VCRs, tape decks, etc.

Analog stereo inputs require a choice about

how the signal is routed through the RSP-1069.

One option is the analog bypass mode. In

this mode, the stereo signal is routed directly

to the volume control and the outputs. It is

pure 2-channel stereo, bypassing all of the

digital circuitry. None of the bass manage

ment features, speaker level settings, contour

settings, or delay settings are active. There

is no subwoofer output. A full-range signal

is sent directly to two speakers.

The other option converts the analog inputs

to digital signals, passing them through the

digital processors in the RSP-1069. This option

allows all of the features to be active includ-

ing bass management settings, crossovers,

subwoofer outputs, contour settings, etc. In

this mode, you can select several surround

modes including 2-CH Stereo, Dolby 3-Ste

reo, 5-CH Stereo, 7-CH Stereo modes. You

can also use Dolby Pro Logic II or Pro Logic

IIx surround, DTS Neo:6 surround, or one of

the DSP 1-4 modes.

NOTE: In addition to the options that follow,

you can select Pro Logic II Cinema, Pro Logic

II Music, Pro Logic IIx Cinema, Pro Logic IIx

Music, 5-channel stereo, or 7-channel stereo

by pressing one of the surround mode buttons

on the remote (PLC, PLM, 5CH, 7CH).

• To select Stereo or Analog bypass

mode for 2-channel analog re

cordings. Press the 2CH button on the

remote to toggle between Stereo (with

digital processing) or Analog Bypass (no

digital processing) modes.

• To select any mode for 2-channel

analog recordings. Press the SUR+

button on the remote, then use the +/– but

tons to step through the optional modes

until the desired mode is displayed.

• To select Dolby multichannel modes

for 2-channel analog recordings.

You can also step through the Dolby op

tions (Pro Logic II, Pro Logic IIx, or 3-Ste

reo) by repeatedly pressing the DOLBY

PLIIx MODE button on the front panel.

You can select Pro Logic or Pro Logic IIx

Cinema or Music modes by pressing the

PLC or PLM buttons on the remote.

To change the Cinema or Music option

in Pro Logic II mode, press the SUR+ but

ton the remote twice while in Pro Logic

II or Pro Logic IIx modes. Then, press the

+/– buttons to select the option.

• To select DTS Neo:6 modes for 2-

channel analog recordings. You can

also step through the DTS options (Neo:6

Cinema or Neo:6 Music) by repeatedly

pressing the DTS Neo:6 button on the

front panel.

To change the Cinema or Music option

in Neo:6 mode, press the SUR+ button

the remote twice while in Neo:6 mode.

Then, press the +/– buttons to select the

option.

• To select DSP multichannel modes

for 2-channel analog recordings.

You can also step through the DSP options

(DSP 1-4, 5CH, 7CH) by repeatedly press

ing the DSP button on the front panel. Di

rectly select 5CH mode by pressing the

5CH button on the remote. Directly select

7CH mode by pressing the 7CH button

on the remote.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Rotel RSP-1069 Bedienungsanleitung Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger und Verstärker Rotel RSP-1069