Rotel RSP-1069 Bedienungsanleitung Seite 18
- Seite / 90
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
18
RSP-1069 Surround Sound Processor
Video Inputs & Outputs
These connections are used for connecting
video signals to and from the RSP-1069. See
the Making Connections section for specific
instructions for each type of component.
The RSP-1069 provides Composite, S-Video,
Component Video, and HDMI connections
Composite video connections simplify system
configuration; however, S-Video connections
typically provide better picture quality. Com-
ponent Video or HDMI connections provide
the best signal quality and are required for
HDTV or progressive scanned DVD video.
NOTE: For proper operation, all HDMI com-
ponents and TVs connected to the RSP-1069
should be compatible with the HDMI Version
1.1 standard. The HDMI digital connections
are usually compatible with DVI components
with an appropriate DVI-D cable adapter.
The RSP-1069 provides upscaling and down-
scaling for the various video formats. Com
-
posite Video or S-Video video signals can
be upscaled to 480p/576p, 720p, 1080i
and 1080p on HDTV Component or HDMI
monitors by choosing the appropriate output
setting in the VIDEO/HDMI menu.
Also, HDMI or Component input video sig-
nals at 1080i or 720p can be downscaled
to 480p/576p for a HDTV monitor by choos-
ing this output setting in the VIDEO/HDMI
menu.
When the input is 1080p, it cannot be down-
scaled but is pass-through only and is not af
-
fected by the output setting.
NOTE: The HDTV Component Video output is
subject to HDCP copy protection. It may not
display 720p or 1080i resolution when the
source signal incorporates copy protection.
Consider the following implications for your
system configuration:
On Screen Display:
The RSP-1069 OSD system is available on the
TV monitor, when using Composite, S-Video,
or Component Video and HDMI connections
from the RSP-1069 outputs to the TV set. OSD
menus are available on all video monitors.
But, the OSD menu video resolution is avail
-
able only at 480i/576i for a Composite/S-
Video monitor, and 480p/576p for a HDTV
monitor. When the monitor is connected by
Component Video only (not together with
HDMI), the OSD is available at 480i/576i.
NOTE: With the RSP-1069, the TV monitor does
not display the video signal and the OSD
menus at the same time. When the main OSD
setup menus are activated, the video input is
interrupted and restored when the OSD menus
are cancelled. When the temporary OSD is
displayed on the TV monitor in the case of
Composite or S-Video video input, it is not
related to the video output resolution.
Output Conversion: The RSP-1069 converts
Composite and S-Video signals to Component
Video signals for output to an NTSC or PAL
TV monitor. S-Video signals cannot be con
-
verted to Composite outputs. For maximum
convenience, connect the RSP-1069 to the
TV monitor with Component Video or HDMI
Video connections.
NOTE: When you have changed the output
resolution in the VIDEO/HDMI menu during
operation, restart by switching power OFF
and ON again, to stabilize the picture image
in the new resolution setup.
Many digital HDTV monitors adjust scan rates
and other video parameters depending on
the type of input connection. If you prefer to
use the TV monitor’s scaling instead of the
RSP-1069 video scaling, you may wish to make
multiple connections between the RSP-1069
and the TV monitor, switching inputs on the
TV to take advantage of these features.
NOTE: Do not connect HDMI and Component
Video outputs to a monitor simultaneously,
as the two video image signals may affect
each other.
HDMI IN 1–4 Video Inputs
HDMI inputs provide various digital video con-
nections for use with components that have
either HDMI outputs or DVI-D outputs (with
an appropriate DVI-HDMI adapter). HDMI
connections carry video signals in all formats
- RSP-1069 1
- 2
- Important Safety Instructions 3
- 1: Controls and Connections 4
- Commandes et Branchements 4
- 2: RR-1060 Remote 5
- Télécommande RR-1060 5
- 3: Amplifiers and Subwoofer 6
- Branchements Vidéo numériques 7
- 8
- 8: VCR Analog Connections 9
- 9: CD Player Connections 10
- 11: AM/FM Tuner Connections 11
- Branchement d’un tuner AM/FM 11
- 12: Zone Connections 12
- Branchement Zone secondaire 12
- 13: On-Screen Menus 13
- Contents 14
- Getting Started 16
- About Rotel 16
- OVERVIEW OF 17
- CONNECTIONS 17
- Video Inputs & Outputs 18
- B and PR) signals, allow 19
- Audio Inputs & Outputs 20
- Other Connections 21
- Making Connections 22
- AM/FM Tuner 23
- Audio Recorder 23
- Video Recorder 23
- DVD-A or SACD Player 23
- HDTV Monitor 23
- SDTV Monitor 24
- Connecting Amplifiers 24
- Connecting a Subwoofer 24
- Remote Zone Connections 24
- Basic Operations 27
- Selecting Inputs 27
- Overview of 28
- Surround Formats 28
- Automatic Surround 31
- Manually Selecting 31
- Surround Modes 31
- Digital Stereo discs 33
- (PCM and HDCD) 33
- 33
- Analog Stereo 33
- Other Settings 34
- Remote Zone Operation 35
- Menu Basics 36
- Configuring Inputs 37
- Multi Input Setup 38
- Configuring 39
- Speakers and Audio 39
- Speaker Setup 40
- Advance Speaker Setup 41
- Subwoofer Setup 42
- Test Tone 42
- Delay Setup 43
- Contour Setup 43
- Miscellaneous Settings 44
- Zone 2–4 Setup 45
- Default Setup 45
- MORE INFORMATION 46
- Troubleshooting 46
- Specifications 47
- ATTENTION : 48
- Remarque 49
- 50
- Sommaire 51
- À propos de Rotel 53
- Pour démarrer 53
- BRANCHEMENTS 54
- Entrées et Sorties Vidéo 55
- B et PR) 56
- Entrées et sorties Audio 57
- Autres connexions 59
- Branchements 60
- Français 61
- Moniteur HDTV 62
- Moniteur TV standard 62
- Branchement des 62
- UTILISATION DU 63
- Vue d’ensemble de la 63
- Vue d’ensemble des 64
- Fonctions de base 65
- Sélection des entrées 66
- Modes surround 70
- Sélection manuelle des 71
- Autres réglages 73
- Fonctionnement des 74
- Zones secondaires 74
- RÉGLAGES 76
- Menus de base 76
- Configuration des Entrées 77
- Configuration des 80
- Enceintes et de la partie 80
- Configuration Avancée des 82
- Enceintes 82
- Réglage du temps de retard 84
- Signal Test (Test Tone) 84
- Réglages Divers 85
- VIDEO/HDMI 86
- Configuration des Zones 2-4 86
- PLUS D’INFORMATIONS 88
- Résolution des pannes 88
- Spécifications 89
- English • Français 90
Verwandte Produkte und Handbücher für Empfänger und Verstärker Rotel RSP-1069
(10 Seiten)
(54 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.153 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern