Rotel RCC-1055 Bedienungshandbuch PDF herunterladen (Seite 9)

English

Playing Discs

Play Buttons

and

Press the Play Button to play the disc indicated

in the Disc Display. The disc will begin playing

with Track 1, unless another track has been

selected before the Play button is pressed.

Unless one of the Repeat Play functions has

been selected:

• After the last track on discs 1 through 4 is

played, the next disc is selected and play

continues with track 1 of the disc.

• At the end of disc 5 disc play stops.

See the Repeat Play section for more infor-

mation.

Notes About MP3 Discs

The RCC-1055 can play discs recorded with

the MP3 (Mpeg1, Layer3) format. Either CD-R

or CD-RW discs may be used. The maximum

allowable number of folders on the disc is 255.

The maximum allowable number of ﬁles on the

disc is 999, with a maximum of 255 in any

folder. The bit rate for the disc must be between

32Kbps and 320Kbps. It is also possible to

play discs recorded with the Mpeg2, Layer3

and Mpeg2.5, Layer3 format.

Pause Button

-p

Press the Pause Button to temporarily stop

playing the disc. Press the Pause Button again,

or the Play Button, to resume playing the disc

at the same track and time.

Stop Button

Press the Stop Button to stop playing the disc.

The disc will remain selected but the track

selection will go back to track 1.

Track Skip Buttons

When a disc is not playing:

• Press the

}

button to select the next track

on the disc. Press and hold the

}

button

to advance more than one track on the

disc.

• Press the

{

button to select the previous

track on the disc. Press and hold the

{

button to go back more than one track on

the disc.

When a disc is playing:

• Press the

}

button to skip the rest of

track being played and begin playing at

the beginning of the next track on the disc.

Press and hold the

}

button to advance

more than one track on the disc.

• Press the

{

button to return to the begin-

ning of the track being played. Press and

hold the

{

button to go back more than

one track on the disc.

Track Selection Buttons

(remote only)

To select a speciﬁc track on a disc, press the

corresponding Track Selection buttons. The

selected track immediately begins playing. To

select tracks higher than number 9 simply press

the appropriate buttons in quick succession.

For example, to select track 17, press the “1”

button then the “7” button.

NOTE: When the RCC-1055 is in Pro-

grammed Play mode, the Track Selection

buttons are used to select tracks to be added

to the program. See the Programmed Disc

Play section.

Search Buttons

[

(remote only)

Press and hold the

]

[

buttons to quickly

search a disc in the forward or reverse direction.

For the ﬁrst ﬁve seconds the search speed will

be approximately four times normal playing

speed. After three seconds the search speed

will increase to approximately 20 times normal

playing speed. The sound volume is reduced

while the search function is being used. The

search function may be used when disc play

has been temporarily stopped with the Pause

function, however no sound is heard. The

Search function will not go past the beginning

or end of the selected disc.

About HDCD

HDCD discs are encoded with a high density

data stream. During playback this high den

sity data stream is decoded to a conventional

digital signal. This HDCD encode/decode

system greatly reduces the errors that are nor

mally generated during the analog-to-digital,

and then digital-to-analog, conversions. The

HDCD system is automatically activated, and

the HDCD Indicator

lights, whenever an

HDCD disc is played.

Display Panel

The Disc Indicators

shows the positions in

the Disc Tray that have discs in them.

The Play Indicator

is lit whenever a disc

is playing.

The Pause Indicator

is lit when disc play

has been temporarily stopped with the Pause

button.

The Disc Selection Indicator

typically shows

the number of the disc currently selected. If the

Remaining Disc Playing Time display option

has been selected the Disc Selection Indica

tor changes to a “–”. See the Time Display

section.

The Track Indicator

shows either the track

that is selected, the total number of tracks on

the disc, or the number of tracks that remain

on the disc. See the Time Button section.

One of the Repeat Play Mode Indicators

will light if one of the repeat play options has

been selected. See the Repeat Play Button

section for more information.

The Random Play Indicator

is lit when one

of the random play options is being used. See

the Random Play section.

The Program Play Indicator

lights whenever

the track programming function is activated.

See the Programed Play Section.

The Intro Scan Indicator

is lit when the

Intro Scan feature is activated. See the Intro

Scan section.

One of the Total/Each/Remain Time Indicators

will light indicating what is shown in the

Time Display. See the Time Display Section.

The Time Display

shows either the total play-

ing time of the disc that is selected, the amount

of time the current track has been playing, the

remaining playing time of the current track, or

the remaining time of the disc that is playing.

See the Time Button section.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Rotel RCC-1055 Bedienungshandbuch Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für CD Spieler Rotel RCC-1055