Rotel RCC-1055 Bedienungshandbuch PDF herunterladen (Seite 2)

RCC-1055 CD Multi-Disc Changer

Rotel products are designed to comply

with international directives on the

Restriction of Hazardous Substances

(RoHS) in electrical and electronic

equipment and the disposal of Waste

Electrical and Electronic Equipment

(WEEE). The crossed wheelie bin

symbol indicates compliance and that

the products must be appropriately

recycled or processed in accordance

with these directives.

Important Safety

Information

WARNING: There are no user service-

able parts inside. Refer all servicing to

qualified service personnel.

WARNING: To reduce the risk of fire or

electric shock, do not expose the unit

to moisture or water. Do not allow for-

eign objects to get into the enclosure.

If the unit is exposed to moisture, or a

foreign object gets into the enclosure,

immediately disconnect the power cord

from the wall. Take the unit to a quali-

fied service person for inspection and

necessary repairs.

Read all the instructions before connecting or

operating the component. Keep this manual so

you can refer to these safety instructions.

Heed all warnings and safety information in these

instructions and on the product itself. Follow all

operating instructions.

Clean the enclosure only with a dry cloth or a

vacuum cleaner.

You must allow 10 cm or 4 inches of

unobstructed clearance around the

unit. Do not place the unit on a bed, sofa, rug,

or similar surface that could block the ventilation

slots. If the component is placed in a bookcase or

cabinet, there must be ventilation of the cabinet

to allow proper cooling.

Keep the component away from radiators, heat

registers, stoves, or any other appliance that

produces heat.

The unit must be connected to a power supply

only of the type and voltage specified on the rear

panel of the unit.

Connect the component to the power outlet only

with the supplied power supply cable or an exact

equivalent. Do not modify the supplied cable in

any way. Do not attempt to defeat grounding

and/or polarization provisions. Do not use

extension cords.

Do not route the power cord where it will be

crushed, pinched, bent at severe angles, exposed

to heat, or damaged in any way. Pay particular

attention to the power cord at the plug and where

it exits the back of the unit.

Main plug is used as the mains disconnect device

and shall remain ready accessible.

The power cord should be unplugged from the

wall outlet if the unit is to be left unused for a

long period of time.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. DANGER: Visible laser radiation when open

and interlock failed or bypassed. Avoid direct

exposure to beam.

3. CAUTION: Do not open the top cover. There are

no user serviceable parts inside the player; leave

all servicing to qualified service personnel.

WARNING!

To reduce the risk of electrical shock, fires, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose the unit to rain or mois-

ture.

3. Do not touch the power cord or plug with

wet hands.

Immediately stop using the com-

ponent and have it inspected

and/or serviced by a qualified

service agency if:

• The power supply cord or plug

has been damaged.

• Objects have fallen or liquid has been spilled

into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any

way

Place the unit on a fixed, level surface strong

enough to support its weight. Do not place it on

a moveable cart that could tip over.

Notice

The COMPUTER I/O connection should be

handled by authorized person only.

FCC Information

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses

and can radiate radio frequency energy and,

if not installed and used in accordance with the

instruction, may cause harmful interference to

radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be deter-

mined by turning the equipment off and on, the

user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.(TV,

radio, etc.)

• Increase the separation between the equipment

and receiver

• Connect the equipment to an outlet on circuit

different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for additional help.

Caution

This device complies with part 15 of the FCC Rules

operation is subject to the following to conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est con-

forme à la norme NMB-003 du Canada.

This symbol means that this unit

is double insulated. An earth

connection is not required.

   























1 2 3 4 5 6 7 ... 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Rotel RCC-1055 Bedienungshandbuch Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für CD Spieler Rotel RCC-1055